文章目录

• 1 速腾聚创激光雷达驱动
• • 报错：Project 'cv_bridge' specifies '/usr/include/opencv' as an include dir
  • Project 'grid_map_cv' specifies '/usr/include/opencv' as an include dir
• 2 a-loam算法
• • 报错： fatal error: opencv/cv.h: 没有那个文件或目录
  • 报错：error: ‘CV_LOAD_IMAGE_GRAYSCALE’ was not declared in this scope
  • 报错：[FATAL] [1668787250.688458461]: BREAKPOINT HIT

1 速腾聚创激光雷达驱动

报错：Project ‘cv_bridge’ specifies ‘/usr/include/opencv’ as an include dir

CMake Error at /opt/ros/melodic/share/cv_bridge/cmake/cv_bridgeConfig.cmake:113 (message):Project 'cv_bridge' specifies '/usr/include/opencv' as an include dir,which is not found.  It does neither exist as an absolute directory nor in'${{prefix}}//usr/include/opencv'. 

参考：https://blog.csdn.net/qq_53627591/article/details/126116822
原因是：NVIDIA xaiver的镜像image自带的是opencv4版本，下面把opencv命名成了opencv4
sudo gedit /opt/ros/melodic/share/cv_bridge/cmake/cv_bridgeConfig.cmake
修改前

if(NOT "include;/usr/include;/usr/include/opencv " STREQUAL " ")set(cv_bridge_INCLUDE_DIRS "")set(_include_dirs "include;/usr/include;/usr/include/opencv")

修改后

if(NOT "include;/usr/include;/usr/include/opencv4 " STREQUAL " ")set(cv_bridge_INCLUDE_DIRS "")set(_include_dirs "include;/usr/include;/usr/include/opencv4")

下面这个报错在其他程序里面出现，在编译速腾聚创激光雷达驱动没有出现，此处作为参考

Project ‘grid_map_cv’ specifies ‘/usr/include/opencv’ as an include dir

CMake Error at /opt/ros/melodic/share/grid_map_cv/cmake/grid_map_cvConfig.cmake:113 (message):Project 'grid_map_cv' specifies '/usr/include/opencv' as an include dir,which is not found.  It does neither exist as an absolute directory nor in'${{prefix}}//usr/include/opencv'.  Check the issue tracker'http://github.com/anybotics/grid_map/issues' and consider creating aticket if the problem has not been reported yet.

修改上面报错的第一行中的文件的94行和96行，将opencv替换为opencv4：
修改前

if(NOT "include;/usr/include;/usr/include/opencv " STREQUAL " ")set(grid_map_cv_INCLUDE_DIRS "")set(_include_dirs "include;/usr/include;/usr/include/opencv")

修改后

if(NOT "include;/usr/include;/usr/include/opencv4 " STREQUAL " ")set(grid_map_cv_INCLUDE_DIRS "")set(_include_dirs "include;/usr/include;/usr/include/opencv4")

2 a-loam算法

报错： fatal error: opencv/cv.h: 没有那个文件或目录

xx/src/A-LOAM/src/draw_boxes.cpp:7:10: fatal error: opencv/cv.h: 没有那个文件或目录#include 

修改 #include 为 #include

报错：error: ‘CV_LOAD_IMAGE_GRAYSCALE’ was not declared in this scope

error: ‘CV_LOAD_IMAGE_GRAYSCALE’ was not declared in this scopecv::Mat left_image = cv::imread(left_image_path.str(), CV_LOAD_IMAGE_GRAYSCALE);

参考：https://blog.csdn.net/weixin_41560777/article/details/124138138
找到对应的kittiHelper.cpp文件，将91行与93行的CV_LOAD_IMAGE_GRAYSCALE改为cv::IMREAD_GRAYSCALE

报错：[FATAL] [1668787250.688458461]: BREAKPOINT HIT

先启动速腾雷达驱动roslaunch rslidar_sdk start.launch ，后启动a-loamroslaunch aloam_velodyne aloam_velodyne_VLP_16_c2.launch

[FATAL] [1668787250.688458461]: BREAKPOINT HITfile = /home/aaeon/hxz/c2_aloam/src/A-LOAM/src/laserOdometry.cppline=240[alaserOdometry-2] process has died [pid 8867, exit code -6, cmd /home/aaeon/hxz/c2_aloam/devel/lib/aloam_velodyne/alaserOdometry __name:=alaserOdometry __log:=/home/aaeon/.ros/log/2653080a-675a-11ed-a57f-48b02d185503/alaserOdometry-2.log].
log file: /home/aaeon/.ros/log/2653080a-675a-11ed-a57f-48b02d185503/alaserOdometry-2*.log

根据报错查看/home/aaeon/hxz/c2_aloam/src/A-LOAM/src/laserOdometry.cpp240行左右内容，怀疑是时间戳问题

            if (timeCornerPointsSharp != timeLaserCloudFullRes ||timeCornerPointsLessSharp != timeLaserCloudFullRes ||timeSurfPointsFlat != timeLaserCloudFullRes ||timeSurfPointsLessFlat != timeLaserCloudFullRes){printf("unsync messeage!");ROS_BREAK();}

先启动启动a-loamroslaunch aloam_velodyne aloam_velodyne_VLP_16_my.launch，后启动速腾雷达驱动roslaunch rslidar_sdk start.launch 则不会报错，且会正常运行