银财中国网
原生RedHat OpenStack搭建
创始人
2024-05-10 23:04:33
0次

文章目录

  • OpenStack的搭建方式
  • 实验软件及镜像
  • 实验环境
  • 配置NTP节点
    • 初始化配置
    • 配置本地yum仓库
    • 上传镜像文件至NTP节点
    • 搭建基于http的网络yum源
    • 搭建NTP服务
  • 配置Controller控制节点和Compute计算节点
    • 初始化配置
  • 安装RedHat OpenStack
    • 安装部署OpenStack
  • 配置OVS桥接

OpenStack的搭建方式

  • Allinone
    • 在一台服务节点上安装阉割版的OpenStack，再使用此节点，在其他三个节点上安装不同的组件
  • TrpileO（OpenStack On OpenStack）
  • PackStack（RedHat）
  • Ansbile（自动化运维工具）
  • 原生OpenStack安装时，是手动安装各个组件

实验软件及镜像

  • 镜像【下载】，提取码Bad5
    软件作用
    VMware Workstation Pro用于部署实验主机节点
    Xshell/Putty/Mobaxterm用于远程连接节点主机
    WinSCP用于上传ISO镜像文件至节点主机
    rhel-server-7.1-x86_64-dvd.iso用于安装节点主机的镜像文件
    RHEL7OSP-6.0-2015-02-23.2-x86_64.iso用于安装搭建OpenStack
    small.img用于发放云主机

实验环境

  • 实验使用的为RHEL7.1版本的Linux，网络模式为仅主机模式，桥接到物理主机的VMnet1网卡，VMnnet1网卡的IP作为节点主机的DNS服务器
    主机名IP地址功能配置
    NTP192.168.43.128提供 NTP服务以及网络YUM源2CPU/1G_RAM/200G_Disk
    Controller192.168.43.129作为管理节点和计算节点2CPU/4G_RAM/200G_Disk
    Compute192.168.43.130作为计算节点2CPU/4G_RAM/200G_Disk
    物理主机VMnet1192.168.43.1

配置NTP节点

初始化配置

  • 修改主机名为NTP
  • 关闭SeLinux
  • 配置主机的IP地址、子网掩码、网关以及DNS
  • 禁止NetworkManager开机自启
  • 关闭防火墙并禁止防火墙开机自启，检查防火墙的状态
  • 重启节点主机
[root@localhost ~]# vim /etc/hostnameNTP
[root@localhost ~]# vim /etc/selinux/configSELINUX=disabled
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736TYPE=EthernetBOOTPROTO=staticNAME=eno16777736DEVICE=eno16777736ONBOOT=yesIPADDR=192.168.43.128NETMASK=255.255.255.0GATEWAY=192.168.43.1DNS1=192.168.43.1
[root@localhost ~]# systemctl disable NetworkManager
[root@localhost ~]# systemctl stop firewall.service
[root@localhost ~]# systemctl disable firewall.service
[root@localhost ~]# systemctl status firewall.service
firewall.serviceLoaded: not-found (Reason: No such file or directory)Active: inactive (dead)
[root@localhost ~]# reboot

配置本地yum仓库

  • 配置本地yum源文件
  • 挂载RHEL7.1的镜像文件到NTP节点主机的/mnt下
[root@NTP ~]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# ls
[root@NTP yum.repos.d]# vim RHEL.repo[Base]name=RHELbaseurl=file:///mntgpgcheck=0enable=1
[root@NTP yum.repos.d]# mount /dev/cdrom /mnt/    #将ISO文件挂载到/mnt下
mount: /dev/sr0 is write-protected, mounting read-only
[root@NTP yum.repos.d]# yum clean all     #清除yum缓存
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: InstallMedia Base
Cleaning up everything
[root@NTP yum.repos.d]# yum repolist    #刷新yum仓库
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
(1/2): Base/group_gz                                       | 134 kB   00:00
(2/2): Base/primary_db                                     | 3.4 MB   00:00
repo id                               repo name                           status
Base                                  RHEL                                4,371
repolist: 4,371

上传镜像文件至NTP节点

  • 创建/iso目录，用于存放镜像文件
  • 使用WinSCP或Mobaxterm将镜像文件上传到NTP节点
[root@NTP ~]# mkdir /iso
[root@NTP ~]# cd /iso/
[root@NTP iso]# ls
RHEL7OSP-6.0-2015-02-23.2-x86_64.iso  rhel-server-7.1-x86_64-dvd.iso

搭建基于http的网络yum源

  • 安装http服务，启动http服务，并设置开机自启动
  • 查看http服务的状态
  • 创建发布目录，并配置镜像文件开机自动挂载到发布目录
  • 重新配置基于http的网络yum源仓库，并测试网络yum源的可用性（如果在yum仓库的目录中还有系统自动生成的其他.repo的文件，需要全部删掉，避免影响之后的实验）
[root@NTP ~]# yum  -y install httpd
[root@NTP ~]# systemctl start httpd
[root@NTP ~]# systemctl enable httpd
[root@NTP ~]# systemctl status httpd
httpd.service - The Apache HTTP ServerLoaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)Active: active (running) since Thu 2023-01-12 15:55:35 CST; 19s agoMain PID: 10713 (httpd)......
[root@NTP ~]# mkdir /var/www/html/{ISO,OpenStack}
[root@NTP ~]# cd /var/www/html/
[root@NTP html]# ls
ISO  OpenStack
[root@NTP html]# vim /etc/fstab    #配置开机自动挂载
[root@NTP html]# tail -2 /etc/fstab
/iso/rhel-server-7.1-x86_64-dvd.iso /var/www/html/ISO iso9660 defaults,loop,ro 0 0
/iso/RHEL7OSP-6.0-2015-02-23.2-x86_64.iso /var/www/html/OpenStack iso9660 defaults,loop,ro 0 0
[root@NTP html]# df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/mapper/rhel-root   50G  7.1G   43G  15% /
devtmpfs               481M     0  481M   0% /dev
tmpfs                  490M  140K  490M   1% /dev/shm
tmpfs                  490M  7.1M  483M   2% /run
tmpfs                  490M     0  490M   0% /sys/fs/cgroup
/dev/sda1              497M  124M  373M  25% /boot
/dev/mapper/rhel-home  148G   33M  148G   1% /home
/dev/sr0               3.7G  3.7G     0 100% /mnt
[root@NTP html]# mount -a  #重新读取fstab文件，进行挂载
[root@NTP html]# df -h
Filesystem             Size  Used Avail Use% Mounted on
/dev/mapper/rhel-root   50G  7.1G   43G  15% /
devtmpfs               481M     0  481M   0% /dev
tmpfs                  490M  140K  490M   1% /dev/shm
tmpfs                  490M  7.1M  483M   2% /run
tmpfs                  490M     0  490M   0% /sys/fs/cgroup
/dev/sda1              497M  124M  373M  25% /boot
/dev/mapper/rhel-home  148G   33M  148G   1% /home
/dev/sr0               3.7G  3.7G     0 100% /mnt
/dev/loop0             3.7G  3.7G     0 100% /var/www/html/ISO
/dev/loop1             515M  515M     0 100% /var/www/html/OpenStack
[root@NTP html]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# vim RHEL.repo[Base]name=RHELbaseurl=http://192.168.43.128/ISOgpgcheck=0enable=1
[root@NTP yum.repos.d]# vim OpenStack.repo[RH7-RHOS-6.0-Installer]name=RH7-RHOS-6.0-Installerbaseurl=http://192.168.43.128/OpenStack/RH7-RHOS-6.0-Installergpgcheck=0enabled=1[RH7-RHOS-6.0]name=RH7-RHOS-6.0baseurl=http://192.168.43.128/OpenStack/RH7-RHOS-6.0gpgcheck=0enabled=1[RHEL-7-RHSCL-1.2]name=RHEL-7-RHSCL-1.2baseurl=http://192.168.43.128/OpenStack/RHEL-7-RHSCL-1.2gpgcheck=0enabled=1[RHEL7-Errata]name=RHEL7-Erratabaseurl=http://192.168.43.128/OpenStack/RHEL7-Erratagpgcheck=0enabeld=1
[root@NTP yum.repos.d]# yum clean all
[root@NTP yum.repos.d]# yum repolist all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
RH7-RHOS-6.0                                             | 1.3 kB     00:00
RH7-RHOS-6.0-Installer                                   | 1.2 kB     00:00
RHEL-7-RHSCL-1.2                                         | 3.3 kB     00:00
RHEL7-Errata                                             | 2.9 kB     00:00
(1/6): Base/group_gz                                       | 134 kB   00:00
(2/6): Base/primary_db                                     | 3.4 MB   00:00
(3/6): RH7-RHOS-6.0/primary                                | 117 kB   00:00
(4/6): RHEL-7-RHSCL-1.2/primary_db                         | 776 kB   00:00
(5/6): RHEL7-Errata/primary_db                             |  10 kB   00:00
(6/6): RH7-RHOS-6.0-Installer/primary                      |  47 kB   00:00
RH7-RHOS-6.0                                                            393/393
RH7-RHOS-6.0-Installer                                                  194/194
repo id                          repo name                        status
Base                             RHEL                             enabled: 4,371
RH7-RHOS-6.0                     RH7-RHOS-6.0                     enabled:   393
RH7-RHOS-6.0-Installer           RH7-RHOS-6.0-Installer           enabled:   194
RHEL-7-RHSCL-1.2                 RHEL-7-RHSCL-1.2                 enabled: 1,766
RHEL7-Errata                     RHEL7-Errata                     enabled:    11
repolist: 6,735

搭建NTP服务

  • 安装NTP服务
  • 配置NTP服务，将NTP节点主机作为服务端。控制节点和计算节点会向NTP节点进行时间同步
  • 启动NTP服务，并设置开机自启动，查看NTP服务的状态
  • 关闭chrony服务，并禁止开机自启。此服务也可以作为时间同步服务器，会和NTP冲突
[root@NTP yum.repos.d]# cd
[root@NTP ~]# rpm -qa | grep ntp    #查看是否安装了NTP服务
ntpdate-4.2.6p5-19.el7_0.x86_64
fontpackages-filesystem-1.44-8.el7.noarch
[root@NTP ~]# yum -y install ntp....
Installed:ntp.x86_64 0:4.2.6p5-19.el7_0Complete!
[root@NTP ~]# vim /etc/ntp.conf    #将网络时间同步服务器注释，配置自身作为时间同步服务器......21 #server 0.rhel.pool.ntp.org iburst22 #server 1.rhel.pool.ntp.org iburst23 #server 2.rhel.pool.ntp.org iburst24 #server 3.rhel.pool.ntp.org iburst2526 server 127.127.1.0    #配置时间同步服务器为自身27 fudge 127.127.1.0 stratum 10    #配置自身作为时间同步服务器......
[root@NTP ~]# systemctl start ntpd
[root@NTP ~]# systemctl enable ntpd    #配置NTP服务开机自启动
ln -s '/usr/lib/systemd/system/ntpd.service' '/etc/systemd/system/multi-user.target.wants/ntpd.service'
[root@NTP ~]# systemctl status ntpd
ntpd.service - Network Time ServiceLoaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled)Active: active (running) since Thu 2023-01-12 16:24:12 CST; 18s agoMain PID: 21546 (ntpd)CGroup: /system.slice/ntpd.service└─21546 /usr/sbin/ntpd -u ntp:ntp -g......
[root@NTP ~]# systemctl stop chrony
[root@NTP ~]# systemctl disable chronyd.service
rm '/etc/systemd/system/multi-user.target.wants/chronyd.service'
[root@NTP ~]# systemctl status chronyd.service
chronyd.service - NTP client/serverLoaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled)Active: inactive (dead)......

NTP节点配置完成

配置Controller控制节点和Compute计算节点

初始化配置

  • 修改主机名为Controller
  • 关闭SeLinux
  • 配置主机的IP地址、子网掩码、网关以及DNS（这里回归了网卡传统命名，所以是ifcfg-eth0）
  • 禁止NetworkManager开机自启
  • 关闭防火墙并禁止防火墙开机自启，检查防火墙的状态
  • 重启节点主机
[root@localhost ~]# vim /etc/hostnameController
[root@localhost ~]# vim /etc/selinux/configSELINUX=disabled
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0TYPE=EthernetBOOTPROTO=staticNAME=eth0DEVICE=eth0ONBOOT=yesIPADDR=192.168.43.129NETMASK=255.255.255.0GATEWAY=192.168.43.1DNS1=192.168.43.1
[root@localhost ~]# systemctl disable NetworkManager
[root@localhost ~]# systemctl stop firewall.service
[root@localhost ~]# systemctl disable firewall.service
[root@localhost ~]# systemctl status firewall.service
firewall.serviceLoaded: not-found (Reason: No such file or directory)Active: inactive (dead)
[root@localhost ~]# reboot

重启完成后，测试与NTP节点主机的连通性

  • 在NTP节点主机，将配置好的网络yum源仓库文件传给Controller控制节点
[root@NTP ~]# cd /etc/yum.repos.d/
[root@NTP yum.repos.d]# ls
OpenStack.repo  redhat.repo  RHEL.repo
[root@NTP yum.repos.d]# rm -rf redhat.repo
[root@NTP yum.repos.d]# ls
OpenStack.repo  RHEL.repo
[root@NTP yum.repos.d]# scp ./* root@192.168.43.129:/etc/yum.repos.d/
The authenticity of host '192.168.43.129 (192.168.43.129)' can't be established.
ECDSA key fingerprint is e9:ee:b8:50:13:9b:f7:de:70:ef:44:1f:11:35:cb:54.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.43.129' (ECDSA) to the list of known hosts.
root@192.168.43.129's password:
OpenStack.repo                                100%  473     0.5KB/s   00:00
RHEL.repo                                     100%   71     0.1KB/s   00:00
  • 在控制节点测试网络yum源仓库的可用性
[root@Controller ~]# cd /etc/yum.repos.d/
[root@Controller yum.repos.d]# ls
OpenStack.repo  redhat.repo  RHEL.repo
[root@Controller yum.repos.d]# yum clean all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: Base RH7-RHOS-6.0 RH7-RHOS-6.0-Installer RHEL-7-RHSCL-1.2: RHEL7-Errata
Cleaning up everything
[root@Controller yum.repos.d]# yum repolist all
Loaded plugins: langpacks, product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Base                                                     | 4.1 kB     00:00
RH7-RHOS-6.0                                             | 1.3 kB     00:00
RH7-RHOS-6.0-Installer                                   | 1.2 kB     00:00
RHEL-7-RHSCL-1.2                                         | 3.3 kB     00:00
RHEL7-Errata                                             | 2.9 kB     00:00
(1/6): Base/group_gz                                       | 134 kB   00:00
(2/6): RHEL7-Errata/primary_db                             |  10 kB   00:00
(3/6): RH7-RHOS-6.0-Installer/primary                      |  47 kB   00:00
(4/6): RH7-RHOS-6.0/primary                                | 117 kB   00:00
(5/6): Base/primary_db                                     | 3.4 MB   00:00
(6/6): RHEL-7-RHSCL-1.2/primary_db                         | 776 kB   00:00
RH7-RHOS-6.0                                                            393/393
RH7-RHOS-6.0-Installer                                                  194/194
repo id                          repo name                        status
Base                             RHEL                             enabled: 4,371
RH7-RHOS-6.0                     RH7-RHOS-6.0                     enabled:   393
RH7-RHOS-6.0-Installer           RH7-RHOS-6.0-Installer           enabled:   194
RHEL-7-RHSCL-1.2                 RHEL-7-RHSCL-1.2                 enabled: 1,766
RHEL7-Errata                     RHEL7-Errata                     enabled:    11
repolist: 6,735
  • 在Compute计算节点同样的初始化配置节点主机，并测试连通性
  • 将NTP节点主机的yum源仓库文件上传到Compute计算节点上，并测试网络yum源仓库的可用性

安装RedHat OpenStack

  • 在控制节点安装packstack工具，用于安装部署OpenStack
  • 安装完成后，检查控制节点的DNS是否配置正确。如果配置不正确，需要在网卡的配置文件中重新配置DNS
[root@Controller ~]# yum -y install openstack-packstack......
Installed:openstack-packstack.noarch 0:2014.2-0.16.dev1401.gdd19d48.el7ostDependency Installed:PyYAML.x86_64 0:3.10-11.el7libyaml.x86_64 0:0.1.4-11.el7_0openstack-packstack-puppet.noarch 0:2014.2-0.16.dev1401.gdd19d48.el7ostopenstack-puppet-modules.noarch 0:2014.2.8-2.el7ost......
Complete!
[root@Controller ~]# cat /etc/resolv.conf
nameserver 192.168.43.1

安装部署OpenStack

  • 生成应答文件，并修改该应答文件
  • 利用应答文件，使用packstack工具安装OpenStack
[root@Controller ~]# packstack --gen-answer-file=/root/ans.txt
Packstack changed given value  to required value /root/.ssh/id_rsa.pub
[root@Controller ~]# cd /root/
[root@Controller ~]# ls
anaconda-ks.cfg  Desktop    Downloads             Music     Public     Videos
ans.txt          Documents  initial-setup-ks.cfg  Pictures  Templates
[root@Controller ~]# vim ans.txt......67 CONFIG_NTP_SERVERS=192.168.43.128  #配置NTP服务器节点......85 CONFIG_CONTROLLER_HOST=192.168.43.129  #配置控制节点......89 CONFIG_COMPUTE_HOSTS=192.168.43.129,192.168.43.130  #配置多计算节点，控制节点复用......93 CONFIG_NETWORK_HOSTS=192.168.43.129  #配置网络节点，控制节点暂代......246 CONFIG_KEYSTONE_ADMIN_PW=badboy  #配置Web界面管理员登录密码 ......560 CONFIG_HORIZON_SSL=y   #配置加密通信的Web界面......629 CONFIG_PROVISION_DEMO=n  #配置不创建演示环境......
[root@Controller ~]# packstack --answer-file=/root/ans.txt
Welcome to the Packstack setup utilityThe installation log file is available at: /var/tmp/packstack/20230112-173134-eqBcat/openstack-setup.logInstalling:
Clean Up                                             [ DONE ]
root@192.168.43.129's password:
root@192.168.43.130's password:
Setting up ssh keys                                  [ DONE ]
Discovering hosts' details                           [ DONE ]......
Applying 192.168.43.130_postscript.pp
192.168.43.130_postscript.pp:                        [ DONE ]
192.168.43.129_postscript.pp:                        [ DONE ]
Applying Puppet manifests                            [ DONE ]
Finalizing                                           [ DONE ]**** Installation completed successfully ******Additional information:......

登录OpenStack首页测试：https://192.168.43.129/dashboard，登录成功后无需做配置
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述

配置OVS桥接

  • 修改控制节点的网卡配置文件
  • 先将网卡配置文件做备份 ， 防止出现故障时无法恢复
  • 创建OVS桥接，修改网卡配置文件
  • 修改网卡桥接，重启网络服务
[root@Controller ~]# cd /etc/sysconfig/network-scripts/
[root@Controller network-scripts]# cp ifcfg-eth0 ifcfg-eth0.bak
[root@Controller network-scripts]# cp ifcfg-eth0 ifcfg-br-ex
[root@Controller network-scripts]# vim ifcfg-br-exTYPE=OVSBridgeNAME=br-exDEVICE=br-exONBOOT=yesDEVICETYPE=ovsOVS_BRIDGE=br-exIPADDR=192.168.43.129NETMASK=255.255.255.0GATEWAY=192.168.43.1DNS1=192.168.43.1
[root@Controller network-scripts]# vim ifcfg-eth0TYPE=OVSPortNAME=eth0DEVICE=eth0ONBOOT=yesDEVICETYPE=ovsOVS_BRIDGE=br-ex
[root@Controller network-scripts]# service network restart
Restarting network (via systemctl):                        [  OK  ]
[root@Controller network-scripts]# ifconfig
br-ex: flags=4163  mtu 1500inet 192.168.43.129  netmask 255.255.255.0  broadcast 192.168.43.255inet6 fe80::742d:32ff:fe73:e74f  prefixlen 64  scopeid 0x20ether 00:0c:29:52:94:1d  txqueuelen 0  (Ethernet)RX packets 93  bytes 7953 (7.7 KiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 137  bytes 17053 (16.6 KiB)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0br-int: flags=4163  mtu 1500inet6 fe80::14b6:b1ff:fe67:294e  prefixlen 64  scopeid 0x20ether 16:b6:b1:67:29:4e  txqueuelen 0  (Ethernet)RX packets 0  bytes 0 (0.0 B)RX errors 0  dropped 0  overruns 0  frame 0TX packets 8  bytes 648 (648.0 B)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0eth0: flags=4163  mtu 1500inet6 fe80::20c:29ff:fe52:941d  prefixlen 64  scopeid 0x20ether 00:0c:29:52:94:1d  txqueuelen 1000  (Ethernet)RX packets 212126  bytes 219696484 (209.5 MiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 106409  bytes 18842452 (17.9 MiB)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73  mtu 65536inet 127.0.0.1  netmask 255.0.0.0inet6 ::1  prefixlen 128  scopeid 0x10loop  txqueuelen 0  (Local Loopback)RX packets 496279  bytes 74615394 (71.1 MiB)RX errors 0  dropped 0  overruns 0  frame 0TX packets 496279  bytes 74615394 (71.1 MiB)TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

以上内容均属原创，如有不详或错误，敬请指出。
本文作者： 坏坏 本文链接： http://t.csdn.cn/Rotab 版权声明： 本博客所有文章转载请联系作者注明出处并附带本文链接！
词库加载错误:未能找到文件“E:\highferrum_mysql\Configuration\Dict_Stopwords.txt”。

上一篇：【异常】原来提示SocketTimeoutException:connect timed out还可能是外部因素导致

下一篇：Revit中墙连接方式和墙连接显示及修改问题

相关内容

热门资讯

喜欢穿一身黑的男生性格（喜欢穿... 今天百科达人给各位分享喜欢穿一身黑的男生性格的知识，其中也会对喜欢穿一身黑衣服的男人人好相处吗进行解...
发春是什么意思（思春和发春是什... 本篇文章极速百科给大家谈谈发春是什么意思，以及思春和发春是什么意思对应的知识点，希望对各位有所帮助，...
网络用语zl是什么意思（zl是... 今天给各位分享网络用语zl是什么意思的知识，其中也会对zl是啥意思是什么网络用语进行解释，如果能碰巧...
为什么酷狗音乐自己唱的歌不能下... 本篇文章极速百科小编给大家谈谈为什么酷狗音乐自己唱的歌不能下载到本地?，以及为什么酷狗下载的歌曲不是...
家里可以做假山养金鱼吗（假山能... 今天百科达人给各位分享家里可以做假山养金鱼吗的知识，其中也会对假山能放鱼缸里吗进行解释，如果能碰巧解...
华为下载未安装的文件去哪找（华... 今天百科达人给各位分享华为下载未安装的文件去哪找的知识，其中也会对华为下载未安装的文件去哪找到进行解...
四分五裂是什么生肖什么动物（四... 本篇文章极速百科小编给大家谈谈四分五裂是什么生肖什么动物，以及四分五裂打一生肖是什么对应的知识点，希...
怎么往应用助手里添加应用（应用... 今天百科达人给各位分享怎么往应用助手里添加应用的知识，其中也会对应用助手怎么添加微信进行解释，如果能...
客厅放八骏马摆件可以吗（家里摆... 今天给各位分享客厅放八骏马摆件可以吗的知识，其中也会对家里摆八骏马摆件好吗进行解释，如果能碰巧解决你...
苏州离哪个飞机场近（苏州离哪个... 本篇文章极速百科小编给大家谈谈苏州离哪个飞机场近，以及苏州离哪个飞机场近点对应的知识点，希望对各位有...