• 1. 基于apt源安装
  • 1.1 安装
  • 1.2 测试安装是否成功
  • 1.3 卸载
    • 1. 停止nginx服务
    • 2. 删除nginx，-purge包括配置文件
    • 3. 移除全部不使用的软件包
    • 4. 罗列出与nginx相关的软件并删除
    • 5. 查看nginx正在运行的进程，如果有就kill掉
• 2. 通过源码包编译安装
  • 1. 安装各种依赖库
  • 2. 安装Nginx
  • 3. 配置软链接
  • 4. 配置开机启动服务

此安装过程是在ubuntu18下完成的。

1. 基于apt源安装

1.1 安装

// 更新包
sudo apt-get update
// 下载安装nginx
sudo apt-get install nginx

Ubuntu安装之后的文件结构大致为：

• 所有的配置文件都在/etc/nginx下，并且每个虚拟主机已经安排在了/etc/nginx/sites-available下
• 程序文件在/usr/sbin/nginx
• 日志放在了/var/log/nginx中
• 并已经在/etc/init.d/下创建了启动脚本nginx
• 默认的虚拟主机的目录设置在了/var/www/nginx-default (有的版本 默认的虚拟主机的目录设置在了/var/www, 请参考/etc/nginx/sites-available里的配置)

其实从上面的根目录文件夹可以知道，Linux系统的配置文件一般放在/etc，日志一般放在/var/log，运行的程序一般放在/usr/sbin或者/usr/bin。

当然，如果要更清楚Nginx的配置项放在什么地方，可以打开/etc/nginx/nginx.conf

然后通过这种方式安装的，会自动创建服务，会自动在/etc/init.d/nginx新建服务脚本，然后就可以使用一下命令来启动

sudo service nginx {start|stop|restart|reload|force-reload|status|configtest|rotate|upgrade}

脚本如下：

#!/bin/sh### BEGIN INIT INFO
# Provides:	  nginx
# Required-Start:    $local_fs $remote_fs $network $syslog $named
# Required-Stop:     $local_fs $remote_fs $network $syslog $named
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts the nginx web server
# Description:       starts nginx using start-stop-daemon
### END INIT INFOPATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/nginx
NAME=nginx
DESC=nginx# Include nginx defaults if available
if [ -r /etc/default/nginx ]; then. /etc/default/nginx
fiSTOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"test -x $DAEMON || exit 0. /lib/init/vars.sh
. /lib/lsb/init-functions# Try to extract nginx pidfile
PID=$(cat /etc/nginx/nginx.conf | grep -Ev '^\s*#' | awk 'BEGIN { RS="[;{}]" } { if ($1 == "pid") print $2 }' | head -n1)
if [ -z "$PID" ]; thenPID=/run/nginx.pid
fiif [ -n "$ULIMIT" ]; then# Set ulimit if it is set in /etc/default/nginxulimit $ULIMIT
fistart_nginx() {# Start the daemon/service## Returns:#   0 if daemon has been started#   1 if daemon was already running#   2 if daemon could not be startedstart-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON --test > /dev/null \|| return 1start-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON -- \$DAEMON_OPTS 2>/dev/null \|| return 2
}test_config() {# Test the nginx configuration$DAEMON -t $DAEMON_OPTS >/dev/null 2>&1
}stop_nginx() {# Stops the daemon/service## Return#   0 if daemon has been stopped#   1 if daemon was already stopped#   2 if daemon could not be stopped#   other if a failure occurredstart-stop-daemon --stop --quiet --retry=$STOP_SCHEDULE --pidfile $PID --name $NAMERETVAL="$?"sleep 1return "$RETVAL"
}reload_nginx() {# Function that sends a SIGHUP to the daemon/servicestart-stop-daemon --stop --signal HUP --quiet --pidfile $PID --name $NAMEreturn 0
}rotate_logs() {# Rotate log filesstart-stop-daemon --stop --signal USR1 --quiet --pidfile $PID --name $NAMEreturn 0
}upgrade_nginx() {# Online upgrade nginx executable# http://nginx.org/en/docs/control.html## Return#   0 if nginx has been successfully upgraded#   1 if nginx is not running#   2 if the pid files were not created on time#   3 if the old master could not be killedif start-stop-daemon --stop --signal USR2 --quiet --pidfile $PID --name $NAME; then# Wait for both old and new master to write their pid filewhile [ ! -s "${PID}.oldbin" ] || [ ! -s "${PID}" ]; docnt=`expr $cnt + 1`if [ $cnt -gt 10 ]; thenreturn 2fisleep 1done# Everything is ready, gracefully stop the old masterif start-stop-daemon --stop --signal QUIT --quiet --pidfile "${PID}.oldbin" --name $NAME; thenreturn 0elsereturn 3fielsereturn 1fi
}case "$1" instart)log_daemon_msg "Starting $DESC" "$NAME"start_nginxcase "$?" in0|1) log_end_msg 0 ;;2)   log_end_msg 1 ;;esac;;stop)log_daemon_msg "Stopping $DESC" "$NAME"stop_nginxcase "$?" in0|1) log_end_msg 0 ;;2)   log_end_msg 1 ;;esac;;restart)log_daemon_msg "Restarting $DESC" "$NAME"# Check configuration before stopping nginxif ! test_config; thenlog_end_msg 1 # Configuration errorexit $?fistop_nginxcase "$?" in0|1)start_nginxcase "$?" in0) log_end_msg 0 ;;1) log_end_msg 1 ;; # Old process is still running*) log_end_msg 1 ;; # Failed to startesac;;*)# Failed to stoplog_end_msg 1;;esac;;reload|force-reload)log_daemon_msg "Reloading $DESC configuration" "$NAME"# Check configuration before stopping nginx## This is not entirely correct since the on-disk nginx binary# may differ from the in-memory one, but that's not common.# We prefer to check the configuration and return an error# to the administrator.if ! test_config; thenlog_end_msg 1 # Configuration errorexit $?fireload_nginxlog_end_msg $?;;configtest|testconfig)log_daemon_msg "Testing $DESC configuration"test_configlog_end_msg $?;;status)status_of_proc -p $PID "$DAEMON" "$NAME" && exit 0 || exit $?;;upgrade)log_daemon_msg "Upgrading binary" "$NAME"upgrade_nginxlog_end_msg $?;;rotate)log_daemon_msg "Re-opening $DESC log files" "$NAME"rotate_logslog_end_msg $?;;*)echo "Usage: $NAME {start|stop|restart|reload|force-reload|status|configtest|rotate|upgrade}" >&2exit 3;;
esac

还有一个好处，创建好的文件由于放在/usr/sbin目录下，所以能直接在终端中使用nginx命令而无需指定路径。

1.2 测试安装是否成功

在命令行中输入：

sudo nginx -t

窗口显示：

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

在浏览器中输入ip地址：

1.3 卸载

1. 停止nginx服务

sudo service nginx stop

2. 删除nginx，-purge包括配置文件

sudo apt-get --purge remove nginx

3. 移除全部不使用的软件包

sudo apt-get autoremove

4. 罗列出与nginx相关的软件并删除

dpkg --get-selections|grep nginx
sudo apt-get --purge remove nginx
sudo apt-get --purge remove nginx-common
sudo apt-get --purge remove nginx-core

5. 查看nginx正在运行的进程，如果有就kill掉

ps -ef |grep nginx
sudo kill -9 XXX

2. 通过源码包编译安装

这种方式可以自定安装指定的模块以及最新的版本。方式更灵活。

官方下载页面：http://nginx.org/en/download.html

configure配置文件详解：http://nginx.org/en/docs/configure.html

1. 安装各种依赖库

安装gcc g++的依赖库

sudo apt-get install build-essential
sudo apt-get install libtool

安装pcre依赖库（http://www.pcre.org/）

sudo apt-get update
sudo apt-get install libpcre3 libpcre3-dev

安装zlib依赖库（http://www.zlib.net）

sudo apt-get install zlib1g-dev

安装SSL依赖库（18.04默认已经安装了）

sudo apt-get install openssl

2. 安装Nginx

#下载最新版本：
wget http://nginx.org/download/nginx-1.13.6.tar.gz
#解压：
tar -zxvf nginx-1.13.6.tar.gz
#进入解压目录：
cd nginx-1.13.6
#配置：
./configure --prefix=/usr/local/nginx 
#编译：
make
#安装：
sudo make install
#启动：
sudo /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
注意：-c 指定配置文件的路径，不加的话，nginx会自动加载默认路径的配置文件，可以通过-h查看帮助命令。
#查看进程：
ps -ef | grep nginx

3. 配置软链接

sudo ln -s /usr/local/nginx/sbin/nginx /usr/bin/nginx

现在就可以不用路径直接输入nginx启动。

4. 配置开机启动服务

在/etc/init.d/下创建nginx文件，sudo vim /etc/init.d/nginx，内容如下：

#!/bin/sh### BEGIN INIT INFO
# Provides:	  nginx
# Required-Start:    $local_fs $remote_fs $network $syslog $named
# Required-Stop:     $local_fs $remote_fs $network $syslog $named
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts the nginx web server
# Description:       starts nginx using start-stop-daemon
### END INIT INFOPATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/nginx
NAME=nginx
DESC=nginx# Include nginx defaults if available
if [ -r /etc/default/nginx ]; then. /etc/default/nginx
fiSTOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"test -x $DAEMON || exit 0. /lib/init/vars.sh
. /lib/lsb/init-functions# Try to extract nginx pidfile
PID=$(cat /etc/nginx/nginx.conf | grep -Ev '^\s*#' | awk 'BEGIN { RS="[;{}]" } { if ($1 == "pid") print $2 }' | head -n1)
if [ -z "$PID" ]; thenPID=/run/nginx.pid
fiif [ -n "$ULIMIT" ]; then# Set ulimit if it is set in /etc/default/nginxulimit $ULIMIT
fistart_nginx() {# Start the daemon/service## Returns:#   0 if daemon has been started#   1 if daemon was already running#   2 if daemon could not be startedstart-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON --test > /dev/null \|| return 1start-stop-daemon --start --quiet --pidfile $PID --exec $DAEMON -- \$DAEMON_OPTS 2>/dev/null \|| return 2
}test_config() {# Test the nginx configuration$DAEMON -t $DAEMON_OPTS >/dev/null 2>&1
}stop_nginx() {# Stops the daemon/service## Return#   0 if daemon has been stopped#   1 if daemon was already stopped#   2 if daemon could not be stopped#   other if a failure occurredstart-stop-daemon --stop --quiet --retry=$STOP_SCHEDULE --pidfile $PID --name $NAMERETVAL="$?"sleep 1return "$RETVAL"
}reload_nginx() {# Function that sends a SIGHUP to the daemon/servicestart-stop-daemon --stop --signal HUP --quiet --pidfile $PID --name $NAMEreturn 0
}rotate_logs() {# Rotate log filesstart-stop-daemon --stop --signal USR1 --quiet --pidfile $PID --name $NAMEreturn 0
}upgrade_nginx() {# Online upgrade nginx executable# http://nginx.org/en/docs/control.html## Return#   0 if nginx has been successfully upgraded#   1 if nginx is not running#   2 if the pid files were not created on time#   3 if the old master could not be killedif start-stop-daemon --stop --signal USR2 --quiet --pidfile $PID --name $NAME; then# Wait for both old and new master to write their pid filewhile [ ! -s "${PID}.oldbin" ] || [ ! -s "${PID}" ]; docnt=`expr $cnt + 1`if [ $cnt -gt 10 ]; thenreturn 2fisleep 1done# Everything is ready, gracefully stop the old masterif start-stop-daemon --stop --signal QUIT --quiet --pidfile "${PID}.oldbin" --name $NAME; thenreturn 0elsereturn 3fielsereturn 1fi
}case "$1" instart)log_daemon_msg "Starting $DESC" "$NAME"start_nginxcase "$?" in0|1) log_end_msg 0 ;;2)   log_end_msg 1 ;;esac;;stop)log_daemon_msg "Stopping $DESC" "$NAME"stop_nginxcase "$?" in0|1) log_end_msg 0 ;;2)   log_end_msg 1 ;;esac;;restart)log_daemon_msg "Restarting $DESC" "$NAME"# Check configuration before stopping nginxif ! test_config; thenlog_end_msg 1 # Configuration errorexit $?fistop_nginxcase "$?" in0|1)start_nginxcase "$?" in0) log_end_msg 0 ;;1) log_end_msg 1 ;; # Old process is still running*) log_end_msg 1 ;; # Failed to startesac;;*)# Failed to stoplog_end_msg 1;;esac;;reload|force-reload)log_daemon_msg "Reloading $DESC configuration" "$NAME"# Check configuration before stopping nginx## This is not entirely correct since the on-disk nginx binary# may differ from the in-memory one, but that's not common.# We prefer to check the configuration and return an error# to the administrator.if ! test_config; thenlog_end_msg 1 # Configuration errorexit $?fireload_nginxlog_end_msg $?;;configtest|testconfig)log_daemon_msg "Testing $DESC configuration"test_configlog_end_msg $?;;status)status_of_proc -p $PID "$DAEMON" "$NAME" && exit 0 || exit $?;;upgrade)log_daemon_msg "Upgrading binary" "$NAME"upgrade_nginxlog_end_msg $?;;rotate)log_daemon_msg "Re-opening $DESC log files" "$NAME"rotate_logslog_end_msg $?;;*)echo "Usage: $NAME {start|stop|restart|reload|force-reload|status|configtest|rotate|upgrade}" >&2exit 3;;
esac

#设置服务脚本有执行权限
sudo chmod +x /etc/init.d/nginx
#注册服务cd /etc/init.d/
sudo update-rc.d nginx defaults

现在基本上就可以开机启动了，常用的命令如下：

sudo service nginx {start|stop|restart|reload|force-reload|status|configtest|rotate|upgrade}